02.05 Buttons, LEDs, and Charging

Open manual menu
  1. SteamVR / VRChat User Manual
  2. 2.5 Buttons, LEDs, and Charging

2.5 Buttons, LEDs, and Charging

Power Button (circled in red)

  • Turns the glove on or off.
  • Solid blue: The glove is not connected.
  • Solid red: Connected; battery level is below 20%.
  • Solid yellow: Connected; battery level is 20%–50%.
  • Solid green: Connected; battery level is 50%–100%.
Locations of the power and Menu buttons on the data box
The red circle indicates the power button; the blue circle indicates the Menu button.

Menu Button (circled in blue)

  • Confirms or triggers the operation indicated by the current product prompt during pairing.
  • Menu light flashing: Charging.
  • Menu light solid: Charging complete.
  • In-game Menu button mapping: See 4.3.

Button Extension Module

Line drawing of the button extension module
The consumer version includes one button extension module for each hand.
Illustration of the button extension module installation
Secure it to the inside of the index finger near the first joint from the palm.

The button extension module provides a joystick and additional inputs. Adjust it to a position where your finger can operate it naturally, the module does not press on the joint, and it does not restrict thumb movement.

Hold the module body when moving it. Do not pull the joystick cable or wires. For details about SteamVR button mapping, see 4.3.

LED Behavior

Power LED

Solid blue
Not connected

Solid red
Connected, below 20%

Solid yellow
Connected, 20%–50%

Solid green
Connected, 50%–100%

Menu LED

Flashing blue
Charging

Solid blue
Charging complete

Charging Safety

Charge with a 5V / 1A power supply. Do not use fast charging. You can also charge through a computer USB port. Stop charging and using the product immediately if the connector is wet or damaged, or if you notice unusual heat, odors, or swelling. Do not disassemble or attempt to repair the product yourself. Contact Customer Service immediately for assistance.

Next Step

After the hardware passes inspection, continue to 3.1 Install HiggloveNg Beta 1.0.6.