02.05 Buttons, LEDs, and Charging

Open manual menu
  1. Virtual Streamer / VTuber User Manual
  2. 2.5 Buttons, LEDs, and Charging

2.5 Buttons, LEDs, and Charging

Power Button (button inside the red circle)

  • Turns the glove on or off.
  • Solid blue: The glove is not connected.
  • Solid red: Connected; battery level is below 20%.
  • Solid yellow: Connected; battery level is 20%–50%.
  • Solid green: Connected; battery level is 50%–100%.
Locations of the power and Menu buttons on the data box
The red circle indicates the power button; the blue circle indicates the Menu button.

Menu Button (button inside the blue circle)

  • Confirms or triggers the operation indicated by the current product prompt during pairing.
  • Menu light flashing blue: Charging.
  • Menu light solid blue: Charging complete.
  • The VTuber workflow does not use game-button mapping.

Button Extension Module

Line drawing of the button extension module
The consumer edition includes one button extension module for each hand.
Button extension module installation
Secure it to the inside of the index finger at the first joint near the palm.

The button extension module provides a joystick and additional inputs. Adjust it to a position where the finger can operate it naturally, the module does not press against the joint, and thumb movement is unobstructed.

The current VMC VTuber workflow outputs finger-bone data only. It does not map the buttons or joystick on the module.

LED Status Demonstration

Power LED

Solid blue
Not connected

Solid red
Connected, below 20%

Solid yellow
Connected, 20%–50%

Solid green
Connected, 50%–100%

Menu LED

Flashing blue
Charging

Solid blue
Charging complete

Charging Safety

Use charging accessories approved by HIGVR. Stop charging and using the product immediately if a connector is wet or damaged, or if you notice unusual heat, odor, or swelling. Do not disassemble or attempt to repair the product yourself. Contact Customer Support immediately for assistance.

Next Step

After the hardware passes inspection, proceed to 3.1 Installing HiggloveNg 1.0.6.