04.02 Starting VMC Output in HiggloveNg

Open manual menu
  1. Virtual Streamer / VTuber User Manual
  2. 4.2 Starting VMC Output in HiggloveNg

4.2 VMC and Warudo

Start VMC Output in HiggloveNg

VMC output does not start automatically by default. After connection and calibration are complete, start the output manually in Settings.

Prerequisites

  • HiggloveNg 1.0.6 has detected the wireless receiver and both gloves.
  • Gesture calibration is complete, and all five fingers move continuously in the software.
  • Warudo is running and ready to receive VMC data.

Procedure

  1. Open Settings.

    Open “Settings” in HiggloveNg.

  2. Open VMC.

    Find “VMC” under Settings.

  3. Verify the destination port.

    Set the HiggloveNg destination port to the same port used by the Warudo VMC receiver. The ports at both ends must match.

  4. Start output.

    Click “Start VMC Output.”

  5. Keep the applications running.

    Keep HiggloveNg and Warudo running during use. The VTuber workflow does not require SteamVR to be running.

Step 1: Open the VMC output settings.
Step 2: Enable output and verify the destination port.

Enable VMC Output

Demonstrates the complete procedure from opening Settings to starting output.

Video to be added

Completion Criteria

VMC output has started, HiggloveNg and Warudo use the same destination port, and finger movement for both hands remains correct in HiggloveNg.

Next Step

Continue to “4.3 Connect Warudo and Verify Finger Movement.”