04.04 Other VMC Receiver Software Examples

Open manual menu
  1. Virtual Streamer / VTuber User Manual
  2. 4.4 Other VMC Receiver Software Examples

4.4 VMC and Warudo

Examples of Other VMC Receiver Applications

The applications below support the VMC protocol. HIG Glove can also output finger data via VMC, allowing it to connect to these applications through the VMC protocol.

Warudo

Verified by HIGVR

Includes complete steps for VMC connection and finger movement verification.

VNyan

Supports VMC connection

Can receive HIG Glove finger data through the VMC protocol.

VSeeFace

Supports VMC connection

Can receive HIG Glove finger data through the VMC protocol.

3tene

Supports VMC connection

Can receive HIG Glove finger data through the VMC protocol.

Luppet

Supports VMC connection

Can receive HIG Glove finger data through the VMC protocol.

Virtual Motion Capture

Supports VMC connection

Can receive HIG Glove finger data through the VMC protocol.

Webcam Motion Capture

Supports VMC connection

Can receive HIG Glove finger data through the VMC protocol.

Waidayo

Supports VMC connection

Can receive HIG Glove finger data through the VMC protocol.

When using another receiver

  1. Confirm that VMC reception is enabled in the current software version.
  2. Use matching port settings on the sender and receiver.
  3. First use a test model to verify the left and right hands and individual finger movements.
  4. Do not apply Warudo menu names directly. Locate the corresponding VMC settings in the current interface of the target application.

If you need assistance

Send the software name and version, model format, VMC settings, and a video of the issue to service@higvr.com. HIGVR will help check the data path and settings.

Next

Go to 5.1 Model Finger Bone Requirements and Movement Verification.