02.03 Putting On the Gloves Correctly

Open manual menu
  1. Business Customer / Developer Integration Manual
  2. 2.3 Putting On the Gloves Correctly

2.3 Put On the Gloves Correctly

Proper fit is essential for stable motion data. Insert all five fingers into the corresponding finger sleeves, leaving the fingertips exposed.

Procedure

  1. Remove rings, bracelets, and other items that could scratch the gloves, and keep your hands dry.
  2. Identify the left and right gloves, then insert each finger into the corresponding finger sleeve.
  3. Continue adjusting the glove until the fingertips are exposed and the bases of the finger sleeves fit closely around the fingers.
  4. Smooth the fabric over the palm and back of the hand, and adjust the wrist strap. Make sure the fabric is not folded and the wires are not under tension.
  5. Naturally straighten your fingers, bend them one at a time, and make a fist. Confirm that you feel no pain, numbness, or significant pressure.

Putting On the Gloves Correctly

The 16:9 video will show the exposed fingertip position, how to smooth the palm area, and the movement check.

Video to be added

Completion Criteria

Both gloves fit securely with the fingertips exposed. All five fingers can straighten naturally and make a fist, and the mount and wires do not restrict movement.

When to Stop Use

If you experience pain, numbness, or skin irritation, or if the wires are under tension or any component comes loose, stop immediately and put the glove on again. If the issue persists, contact support.

Next Step

After putting on the gloves, proceed to 2.4 Adjust the TMR and N52 Positions.